The difference between the motor and the reducer is analyzed as follows:
　　A motor is an electromagnetic device that converts or transmits electrical energy according to the law of electromagnetic induction. Electric motors are also commonly known as motors.
　　The reducer is a power transmission mechanism that uses a gear speed converter to decelerate the number of revolutions of the motor to a desired number of revolutions and obtain a mechanism of a large torque.
　　Simply speaking, it is the transmission equipment between the motor and the mechanical equipment. The large equipment must be used. It mainly converts the motor speed into torque!
　　Supplement: The use of the reducer is quite extensive. In addition to the use of a speed reducer on large equipment, many small equipment will also use reducers, such as those used on automatic roll-up doors.
　　If you are talking about a reducer that is a geared motor, you can compare it with an ordinary motor.
　　Gear motor is called gear motor, gear motor, is a combination of gear box and motor, are modular combination, common motor is commonly used is 4 pole (output synchronous speed 1500rpm), 6 pole (output synchronous speed 1000rpm), 8 pole (output synchronous speed 750rpm), motor, which is the most commonly used 4-pole motor, the higher the number of poles, the more expensive, because the equipment is generally used in the speed is relatively small, and the motor output speed or torque can not meet the actual requirements, so The speed of the motor is reduced by a gear mechanism or other mechanism (such as a cycloid), and the output torque is increased to meet the actual speed and torque requirements.